IPAC2012 - List of Authors (Escallier, J.)

Paper	Title	Page
WEEPPB013	Direct Wind Superconducting Corrector Magnets for the SuperKEKB IR	2191
	B. Parker, M. Anerella, J. Escallier, A.K. Ghosh, A.K. Jain, A. Marone, P. Wanderer BNL, Upton, Long Island, New York, USA Y. Arimoto, M. Iwasaki, N. Ohuchi, M. Tawada, K. Tsuchiya, H. Yamaoka, Z.G. Zong KEK, Ibaraki, Japan
	Upgrade of the KEKB asymmetric e⁺e⁻ collider for a forty-fold luminosity increase, denoted SuperKEKB, is now underway. For SuperKEKB the beam crossing angle is increased to provide separate focusing channels for the incoming and outgoing electron and positrons beams in new superconducting Interaction Region (IR) magnets. Two functional classes of superconducting corrector magnets are needed to meet SuperKEKB beam optics goals. Dipole, skew-dipole, skew-quadrupole and octupole coil windings will be inserted inside the bores of the main IR quadrupoles to make magnet center alignments, roll adjustments and non-linear optics corrections. A second class of high-order magnetic multipole corrector coils is needed to compensate the non-linear fringe field experienced by the circulating beam that passes just outside the main quadrupole coils that are closest to the Interaction Point (IP). Near the IP there is no space for magnetic yokes or other passive shielding to diminish the fringe field. At the time of this conference the SuperKEKB corrector magnet production will be under way. The SuperKEKB correction coil design and our production technique are reviewed in this paper.

THPPD044	Fabrication and Testing of Curved Test Coil for FRIB Fragment Separator Dipole	3611
	S.A. Kahn Muons, Inc, Batavia, USA J. Escallier, R.C. Gupta, G. Jochen, Y. Shiroyanagi BNL, Upton, Long Island, New York, USA
	Funding: Supported in part by SBIR Grant 4746 · 11SC06273 A critical element of the fragment separator region of the Facility for Rare Isotope Beams (FRIB) is the 30° dipole bend magnet. Because this magnet will be subjected to extremely high radiation and heat loads, operation at 4.5 K would not be possible. High temperature superconductors which have been shown to be radiation resistant and can operated in the 30-50 K temperature range which is more effective for heat removal. An efficient design for this magnet would make use of coils that follow the curvature of the magnet. Winding curved coils with negative curvature are difficult as the coil tends to unwind during the process. As part of an R&D effort for this magnet we are winding a ¼ scale test coil for this magnet with YBCO conductor and are testing it at 77 K. This paper will discuss the winding process and the test results of this study.

Paper

Title

Page

Direct Wind Superconducting Corrector Magnets for the SuperKEKB IR

2191

B. Parker, M. Anerella, J. Escallier, A.K. Ghosh, A.K. Jain, A. Marone, P. Wanderer
BNL, Upton, Long Island, New York, USA
Y. Arimoto, M. Iwasaki, N. Ohuchi, M. Tawada, K. Tsuchiya, H. Yamaoka, Z.G. Zong
KEK, Ibaraki, Japan

Upgrade of the KEKB asymmetric e⁺e⁻ collider for a forty-fold luminosity increase, denoted SuperKEKB, is now underway. For SuperKEKB the beam crossing angle is increased to provide separate focusing channels for the incoming and outgoing electron and positrons beams in new superconducting Interaction Region (IR) magnets. Two functional classes of superconducting corrector magnets are needed to meet SuperKEKB beam optics goals. Dipole, skew-dipole, skew-quadrupole and octupole coil windings will be inserted inside the bores of the main IR quadrupoles to make magnet center alignments, roll adjustments and non-linear optics corrections. A second class of high-order magnetic multipole corrector coils is needed to compensate the non-linear fringe field experienced by the circulating beam that passes just outside the main quadrupole coils that are closest to the Interaction Point (IP). Near the IP there is no space for magnetic yokes or other passive shielding to diminish the fringe field. At the time of this conference the SuperKEKB corrector magnet production will be under way. The SuperKEKB correction coil design and our production technique are reviewed in this paper.

THPPD044

Fabrication and Testing of Curved Test Coil for FRIB Fragment Separator Dipole

3611

S.A. Kahn
Muons, Inc, Batavia, USA
J. Escallier, R.C. Gupta, G. Jochen, Y. Shiroyanagi
BNL, Upton, Long Island, New York, USA

Funding: Supported in part by SBIR Grant 4746 · 11SC06273
A critical element of the fragment separator region of the Facility for Rare Isotope Beams (FRIB) is the 30° dipole bend magnet. Because this magnet will be subjected to extremely high radiation and heat loads, operation at 4.5 K would not be possible. High temperature superconductors which have been shown to be radiation resistant and can operated in the 30-50 K temperature range which is more effective for heat removal. An efficient design for this magnet would make use of coils that follow the curvature of the magnet. Winding curved coils with negative curvature are difficult as the coil tends to unwind during the process. As part of an R&D effort for this magnet we are winding a ¼ scale test coil for this magnet with YBCO conductor and are testing it at 77 K. This paper will discuss the winding process and the test results of this study.