Author: Celona, L.
Paper Title Page
THPB028 The ESS Low Energy Beam Transport Line Design 912
  • L. Neri, L. Calabretta, A.C. Caruso, L. Celona, S. Gammino, A. Longhitano, D. Mascali
    INFN/LNS, Catania, Italy
  • B. Cheymol, A. Ponton
    ESS, Lund, Sweden
  The linear accelerator of the European Spallation Source (ESS) will deliver proton beams of 50 mA and 2.5 GeV onto the 5 MW neutron production target. The Proton Source for ESS (PS-ESS) [1] is based on the experience of TRIPS and VIS developed at LNS Catania [2,3]. A two solenoid Low Energy Beam Transport (LEBT) is foreseen to match the beam into the first acceleration stage, the Radio-Frequency Quadrupole (RFQ) [4]. Beam production means also detailed characterization of produced beam, with this scope the LEBT houses many instrumentation devices and use different techniques that will be described in this work. The LEBT will be also equipped with an electrostatic chopper in order to remove the unwanted part of the beam pulse during the natural rise and fall times of the ion source. Beam dynamics calculations of the LEBT have been carried out considering also the Space Charge Compensation (SCC) produced by the interaction of the beam with the residual gas, and its effect on beam transport and chopping. Particular emphasis has been put on the evaluation of the beam transient behavior, due to the chopping process, at the entrance of the RFQ, results of the study are presented in this paper.  
THPB076 Design Issues of the Proton Source for the ESS Facility 1008
  • L. Celona, L. Allegra, C. Caliri, G. Castro, G. Ciavola, R. Di Giugno, S. Gammino, D. Mascali, L. Neri
    INFN/LNS, Catania, Italy
  The European Spallation Source facility will be one of the fundamental instruments for science and engineering of the future. A 2.5 GeV proton accelerator is to be built for the neutron production. INFN-LNS is involved in the Design Update for the proton source and Low Energy Beam Transport (LEBT) line. The proton source is required to produce a low emittance 90 mA beam, 2.86 ms pulsed with a repetition rate of 14 Hz. Microwave Discharge Ion Sources (MDIS) enable us to produce such high intensity proton beams characterized by very low emittance (< 0.2 π.mm.mrad). The source design is based on a flexible magnetic system which can be adapted to electrostatic Bernstein waves heating mechanism; this will permit a strong increase in the electron density with an expected boost of the output current. The main features of the source design, including the microwave injection system and beam extraction, will be described hereinafter.